All posts by Ruturaj Vartak

Firefox 1.5 released

Firefox 1.5
The latest version of Firefox, ie Firefox 1.5 (DeerPark) has been released with a new home.

Here are some of the features in Firefox 1.5

  • Firefox 1.5 provides easier navigation for everyone, including those who are visually or motor-impaired. Firefox is now the first browser to support DHTML accessibility, which enables Web content to be read aloud – even new kinds of graphics-rich content. Users may navigate with keystrokes rather than mouse clicks, reducing the tabbing required to navigate documents such as spreadsheets. Firefox 1.5 is also the first browser to meet government requirements that software be easily accessible to users with physical impairments.
  • Clear Private Data, Protect your privacy with the new Clear Private Data tool. With a single click, you can delete all personal data, including browsing history, cookies, web form entries and passwords.
  • New support for Web Standards including SVG, CSS 2 and CSS 3, and JavaScript 1.6.
  • Improved pop-up blocking
  • Faster browser navigation with improvements to back and forward button performance.
  • Drag and drop reordering for browser tabs.

VirtualHosts little bit more…

You can make a domain run on a different port than 80, which is the default port of HTTP, in the previous examples of VirtualHost Configurations, I’ven’t specified the port, which implicitly is 80.

If you want to run the website on a different port, you need to make sure Apache is listning on that port. To do that, you set a directive Listen

Listen 8080

Alternatively you can also specify the IP on which it should listen.


Now if you want to run a Name-based VirtualHost on a specific, you make sure that you set the NameVirtualHost directive to a specific port as well.


Once you’ve set the NameVirtualHost, you need to set the actual VirtualHost configuration as well.
there is just once change to be made…


Important: You should note that all the domains,,,, should always resolve an IP address on which NameVirtualHost is defined. Without which, the configuration does not make any sense.

Setting VirtualHosts

The most important part of setting Apache is setting the hosts, or VirtualHosts. The term “VirtualHost” comes from the fact that one single host or comptuer is hosting many hostnames. Apache was the one to start of with this type of hosting, in this Apache picks up the Host header from a standard HTTP request to translate the website associated for that host. This type of hosting is known as the Name-based virtual hosting, which is the most common of all the hosting types. The other one is the IP-based hosting which requires each domain to have a separate IP.

What I will show you is how to set up a name based virtualhost.

Now, A simple GET request for my page root would be as

GET / HTTP/1.1

Now apache picks up “” from the request header and then translates it to the virtual host that is mapped to

Lets assume you have an IP, that you need to set up for virtual hosting, then first, you need to tell Apache that this IP is used for Namebased Virtual hosting.


Now that you have done with setting the IP for virtual hosting, you need to configure the VirtualHosts.

Let us take as the domain that needs to be set. So here it goes

  DocumentRoot /www/domains/
  CustomLog logs/ combined
  ErrorLog logs/
  DirectoryIndex index.php

Now let us review the configurations

  • ServerName: this is the main servername, it should be domain name
  • ServerAlias: this is an alias, eg should mean same as on HTTP
    You can set anything like as well. Just make sure that points to
  • DocumentRoot: This is the main directory that points to domain, this is the file system path to the directory
  • CustomLog: This is the access_log for, remember, we’d set the variable of “combined” log format, we are useing it here, if you want a different format, you can specify the LogFormat before specifying the CustomLog directive
  • ErrorLog: Any errors while serving are logged in this file
  • DirectoryIndex: Defines the default document page for root, eg when you do it tells the server to serve “index.php”, so you can set it whatever you want default-page.html,, etc.
  • ServerAdmin: Just specify the email address, this would show up, when there is any server error.

So now if you want to add a configuration for host “”…

  DocumentRoot /www/domains/
  CustomLog logs/ combined
  ErrorLog logs/
  DirectoryIndex index.php

The httpd.conf file

The httpd.conf file is the main configuration file of Apache. It rests in “apache-install-dir/conf”

Now lets take a look at some important and useful parameters

This is param sets the default server name, it should generally be the FQDN or the Fully Qualified Domain Name of the machine, or the IP, if the machine doesn’t have any FQDN.

This is a setting which encloses any of the settings for the given directory. So you specify the physical directory as the argument. So if you have a directory as /websites/mywebsite/somedir, you would do the following.

<Directory /websites/mywebsite/somedir>
... your settings

The AllowOverride allows the user, to override some of the settings by using their own file. This own file is the magical .htaccess file. By default it is set to None, which means the user can’t override the settings by specifying the .htaccess file in the directory. But you can change the AllowOverride None setting to AllowOverride All

This directive takes several options, I’ll explain some them,
Indexes: This allows a directory listing. U must have come accross something like this
Directory Listing

FollowSymLinks: This allows apache to follow symbolic links, symbolic links are nothing but links in *nix systems, eg. “files” in /etc/ can point to /files/myfiles/files
You can use both these options at once by

Options +Indexes -FollowSymLinks

The above setting will allow directory listing but won’t allow Symbolic links. So “+” to apply and “-” to remove the setting

I talked about the magic file .htaccess, This is the place where you specify the name of the file, By default it is “.htaccess”
The . “period” start is to make it a hidden file in *nix systems

Denying files
To deny files over the web, is the job of the server, in apache, we can do exactly by using the Files directive.

<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All

Note the ~ sign, this is used when you are giving a regular expression to match the files., Once the files are selected, they can be denied by using the Deny directive.
The above regex is to deny all the files that start with a “.ht”

Access Logs
To create access logs, we need to specify the format of the log, and the file path.
First we need to set the LogFormat directive
The most common is the “combined” log, which logs ip, user, time error code, referer and user agent

LogFormat “%h %l %u %t \”%r\” %>s %b \”%{Referer}i\” \”%{User-Agent}i\”” combined

Note: the log format has been given a name “combined”, feel free to create different formats for your needs and name it accordingly
Then we need to set the filename of the log,

CustomLog /usr/local/apache/logs/access_log common

The second parameter of the CustomLog directive which sets the filename of the log is the log format name, that we defined earlier.

When you want to look at the current status of the server, ie whom is it responding to, what pages is it serving, how many servers are running… and so on..
There is no better way than to set server-status
Check the screen shot of it.


To enable it …

<Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from

check the configuration, it is allowing only IP 84 to check the stats and others are forbidden. You can set your IP as you wish.
If you want even more info. you can set the Extended status

ExtendedStatus On

Apache beginings

For guys who have reached here, but still don’t know what httpd is,
Apache is a web server, For all the web pages, websites, blogs, image galleries that are hosted on the web, there needs to be server who “serves” these documents (pages, images, files) to the client (the user’s browser)

Apache got its name from … well… its nothing but a “A patchy server”, httpd apache is an open-source project, which was programmed by many programmers over the world. And everytime a bug-fix, a new feature was required, the main code was just “patched”. And hence it got its name Apache.

Apache being a standard web-browser, runs on port 80, this is the standard HTTP port. Before you begin ahead, let me warn you changing the settings of Apache can change the way a website behaves, and to edit its settings you need root access or Administrator access.

To control apache, you basically need to edit 2 important files “httpd.conf” and “.htaccess”

Code for writing the comment to the DB

Now create a new page called ‘addcomment.php’

$conn = mysql_connect('localhost', 'username', 'password');

$comdate = $_POST['comdate'];
$articleid = $_POST['articleid'];
$comsubject = htmlspecialchars(addslashes($_POST['comsubject']));
$comuser = htmlspecialchars(addslashes($_POST['comuser']));
$comtext = htmlspecialchars(addslashes($_POST['comtext']));

//write the query
$sql = "insert into comments(comdate, articleid, comsubject, comuser, comtext)";
$sql .= " values ('" . $comdate . "', " . $articleid . ", '" . $comsubject . "', '" . $comuser . "', '" . $comtext . "');";

if (!@mysql_query($sql)) {
  echo ('We are unable to register your comment, sorry');
} else {
  echo ("Your comment was added successfully<br>");
  echo ("<A HREF="article.php">Back to Articles</A>");